PL 200 is a premium grade adhesive for paneling, drywall and other light construction, inside or outside.
All Season Formula
Strong, flexible bond
Formulated for bonding drywall and wood paneling
Use on wood and metal studs
HOW TO USE:
Panel installations: To assure positive adhesive, make certain all surfaces are clean, dry and free of dirt and foreign materials.
Cut spout to desired bead size (1/4 recommended) and puncture seal inside spout.
Apply a continuous bead to all furring strips, studs and top and bottom plates. Position prefitted panels.
Follow the nailing schedule for adhesives nail-on attachment per the Gypsum Association Manual. If installing panels to drywall, apply adhesive in a zigzag pattern within 1 inch of vertical edges on each side and two vertical beads in the panel center, 16 inches apart.
Use mechanical fasteners at top and bottom to hold panel in place. Warped or bowed panels should not be used.