Categories

Site Information

 Loading... Please wait...
  • Ives CS Series Continuous Hinges Stainless Steel Full Mortise Hinge w/ AL Cover - 700CS

Ives CS Series Continuous Hinges Stainless Steel Full Mortise Hinge w/ AL Cover - 700CS

$430.16
SKU:
700CS
Quantity:

Product Description

For more than 120 years IVES has produced a full line of premium quality building hardware and accessories that delivers application flexibility and superior value. The expansive portfolio includes hinges, pivots, flush bolts, strikes, door trim, pulls, protection plates, lock guards and many other hardware accessories.

Ives offers a wide range of Hinges and Pivots Multiple latches, catches and bolts to assure a door will stay closed when it is not in use.

Hinges
Selections of the Proper Weight and Bearing Type
Standard Weight - Plain Bearing
Standard Weight - Ball Bearing, Concealed Bearing
Heavy Weight - Ball Bearing, Concealed Bearing
 
Considerations to Determine Weight and Bearing Type
  • Weight of Door
  • Frequency of use
  • Frame
  • Door Hardware

Always use ball bearing or concealed bearing hinges for doors with door closers and in all fire rated openings. Heavy weight doors and high frequency doors should use heavy weight ball bearing or concealed bearing hinges.

Guidelines for Hinge Material

  • Interior door or non-corrosive area use: Plated or painted Steel
  • Interior labeled door use: Plated or Painted Steel, Stainless Steel
  • Interior door in corrosive area use: Stainless Steel , Brass, Bronze
  • Exterior doors use: Stainless Steel, Brass, Bronze

NOTE: Standard pin material are: Brass Hinge – Steel Pin, Stainless Steel Hinge – Stainless Steel Pin, Steel Hinge – Steel Pin

Considerations to Determine Hinge Size
  • Door Width
  • Door Thickness
  • Weight
  • Clearance

Pivots
The door rests on the bottom pivot in this application. This reduces the stress on the frame by distributing the weight of the door throughout the floor and structure. By taking advantage of the strength of the structure, this makes a pivot the ideal solution for your heavy doors. Center and pocket pivots also provide an aesthetic option for your opening.

Butt Hinges

Hanging the door so it swings freely is a basic requirement that cannot be overlooked but that does not mean selecting the correct hinge is easy. Ives offers an assortment of hinges including a variety of butt hinges that will cover your every need. A large selection of materials, knuckles, bearings and styles will assure that your door is hung to not only swing freely and openly but also meet code requirements. It is important to consider the door width, thickness, weight and clearance when choosing your hinge but no matter your need Ives can provide a quality hinge to help hang your door. 

Features and benefits

  • Butt hinges are offered in brass, steel and stainless steel base materials to meet code requirements and keep projects on budget
  • A variety of butt hinge types are offered to meet a variety of door requirements including door width, door thickness, weight and clearance
  • A large variety of finishes are offered to match any current designs or complete a cohesive look for a new design
  • Ives is backed by Allegion, a global leader in fire and life safety products

Designs and finishes

Designs:

Number of knuckles

Consider the door width, door thickness, weight and the amount of traffic to determine how many knuckles should be used.

  • 3 Knuckle 
    • Aesthetically appealing
    • Clean lines
    • Durable and reliable
  • 5 Knuckle
    • Durable and reliable

Function

Consider the door width, door thickness, weight and the amount of traffic to determine the function that best meets your application.

  • PB - Plain Bearing: Standard weight doors, low usage applications
  • BB - Ball Bearing: Heavy doors, high usage applications
  • CB - Concealed Bearing: Standard weight door, medium usage application
  • SP - Spring Hinge: Standard to moderate weight door, helps assure the door closes

Type

Consider how the door should open to pick the correct type of hinge.

  • 1 - Full Mortise
  • 2 - Half Mortise
  • 3 - Full Surface 
  • 4 - Half Surface

Weight / Options

  • Blank - Standard Weight 
  • HW - Heavy Weight 
  • SC - Swing Clear 
  • SH - Security Stud 
  • WT - Wide Throw
  • HT - Hospital Tip 
  • RC - Round Corners: 1/4" or 5/8" Radius

Sizes

Consider the door width, door thickness, weight and clearance to determine hinge size

  • 3.5 x 3.5 
  • 4 x 4 
  • 4.5 x 4 
  • 4.5 x 4.5
  • 4.5 x 5 
  • 4.5 x 6 
  • 5 x 4.5 
  • 5 x 5
  • 5 x 6
  • 5 x 7
  • Larger sizes, up to 6 x 8 are available. Consult factory

Finishes:

  • 600, USP – Primed for painting, Steel 
  • 605, US3 – Bright Brass, Brass
  • 606, US4 – Satin Brass, Brass
  • 612, US10 – Satin Bronze, Bronze
  • 613, US10B – Oil Rubbed Dark Bronze, Bronze
  • 619, US15 – Satin Nickel, Brass
  • 625, US26 – Bright Chrome, Brass
  • 626, US26D – Satin Chrome, Brass
  • 630, US32D – Satin Stainless Steel
  • 632, US3 – Bright Brass, Steel
  • 633, US4 – Satin Brass, Steel 
  • 639, US10 – Satin Bronze, Steel 
  • 640, US10B – Oil Rubbed Dark Bronze, Steel 
  • 641, US10A – Dark Bronze Relieved, Steel 
  • 643, US11 – Satin Bronze, Steel 
  • 646, US15 – Satin Nickel, Steel 
  • 651, US26 – Bright Chrome, Steel 
  • 652, US26D – Satin Chrome, Steel

Base Material
Hinge Base material is key to preserving the life of a hinge

Base MaterialFerrorus/Non-FerrousApplicationFor Use on Fire-Rated Doors
Steel Ferrous/Susceptible to Rust Interior Doors Yes
Brass Non-Ferrous/Rust Proof Interior Doors in Corrosive Areas & Exterior Doors No
Stainless Steel Ferrous/Highly Resistant to Rust Interior Doors in Corrosive Areas & Exterior Doors Yes

Special Pin Applications

  • NRP- Non-Removable Pin
  • TW4 - Four Wire 
  • TW8 - Eight Wire 
  • MON - Monitor 
  • TW4M - Four Wire with Monitor 
  • TW8M - Eight Wire with Monitor
Guidelines for Frequency of Door Usage
Build Type Daily Usage Hinge Type
High Frequency/Heavy Weight Door
Large Department Store Entrance 5,000 Heavy Weight
Hospital Corridor and Surgical Doors 5,000 Heavy Weight
Large Office Building Entrance 4,000 Heavy Weight
School Entrance 1,250 Heavy Weight
School Toilet Door 1,250 Heavy Weight
Office Stairwell 500 Heavy Weight
Office Building Toilet Door 400 Heavy Weight
Medium Frequency/Medium Weight Door
School Corridor Door 100 Standard Weight
Hospital Consultation Rooms 100 Standard Weight
Office Building Corridor Door 80 Standard Weight
Store Toilet Door  60 Standard Weight
Storage Room 50 Standard Weight
Low Frequency/Light Door
Residential Entrance 30 Plain Bearing
Interior Residential 20 Plain Bearing
 
ANSI/BHMA Grade/Minimum Cycle Requirements
Grade 1: 2,500,000 Heavy Weight Ball & Concealed Bearing
Grade 2: 1,500,000 Standard Weight Ball & Concealed Bearing
Grade 3: 350,000 Light Weight Plain Bearing
 
Guidelines for Hinge Height
Door Thickness (in.) Door Width (in.) Hinge Height (in.)
1 3/8” Up to 32” 3 1/2"
1 3/8" 32” to 37” 4”
1 3/4" Up to 36” 4 1/2”
1 3/4" 36” to 48” 5”
1 3/4" Over 48” 6”
2” - 2 1/2”  Up to 42” 5” heavy weight
2” - 2 1/2”  Over 42” 6” heavy weight

Clearance Requirement

Door Thickness Clearance Needed Hinge Open Width
1 3/8  3/4 4
1 3/4 1 4
1 3/4 1 1/2 4 1/2
1 3/4 2 5
1 3/4 3 6
2 1 4 1/2
2 1 1/2 5
2 2 1/2 6
2 1/4 1 5
2 1/4 2 6
2 1/2  3/4 5
2 1/2 1 3/4 6
3  3/4 8
3 2 3/4 8

Guidelines for Number of Hinges

  • Doors under 7'6" - 3 hinges
  • Doors over 7'6" - 4 hinges
Architectural Hinges
3PB1 3 Knuckle, Plain Bearing Full Mortise Hinge
  • For standard weight doors
  • Low frequency usage
  • Packed with wood and metal screws
    *Not for use with a door closer

3CB1 3 Knuckle, Concealed Bearing Full Mortise Hinge

  • For standard weight doors
  • Medium frequency usage
  • Packed with wood and metal screws

3CB1HW 3 Knuckle, Concealed Bearing Full Mortise Hinge

  • For heavy weight doors
  • High frequency usage
  • Packed with wood and metal screws

3SP1 3 Knuckle Spring Full Mortise Hinge

  • For automatic closing of doors
  • Packed with wood and metal screws

5PB1 5 Knuckle, Plain Bearing Full Mortise Hinge

  • For standard weight doors
  • Low frequency usage
  • Packed with wood and metal screws
    *Not for use with a door closer.

5BB1 5 Knuckle, Ball Bearing Full Mortise Hinge

  • For standard weight doors
  • Medium frequency usage
  • 2 ball bearing
  • Packed with wood and metal screws

5BB1HW 5 Knuckle, Ball Bearing, Heavy Weight Full Mortise Hinge

  • For heavy weight doors
  • High frequency usage
  • 4 ball bearing
  • Packed with wood and metal screws

5BB1WT 5 Knuckle, Ball Bearing, Wide Throw Full Mortise Hinge

  • For medium weight doors
  • Medium frequency usage
  • 2 ball bearing
  • Packed with wood and metal screws

5BB4 5 Knuckle, Ball Bearing, Half Surface Hinge

  • For standard weight doors
  • Medium frequency usage
  • 2 ball bearing
  • Packed with through bolts, grommets and sheet metal screws

5BB4HW 5 Knuckle, Ball Bearing, Half Surface Heavy Weight Hinge

  • For heavy weight doors
  • High frequency usage
  • 4 ball bearing
  • Packed with through bolts, grommets and sheet metal screws

5BB1SC 5 Knuckle, Ball Bearing, Swing Clear Full Mortise Hinge

  • For standard weight doors
  • Square edge standard
  • Medium frequency usage
  • 2 ball bearing
  • Packed with flat head wood and metal screws

*Designed to completely clear the opening when door is opened 92 degrees.

5BB1SCHW 5 Knuckle, Ball Bearing, Swing Clear Heavy Weight Full Mortise Hinge

  • For heavy weight doors
  • Beveled edge standard
  • High frequency usage
  • 2 ball bearing
  • Packed with flat head wood and metal screws

*Designed to completely clear the opening when door is opened 92 degrees.

Electrified Hinge

  • Available Options
    • Through Wire - TW4 (4 wires) & TW8 (8 wires)
    • Monitor – MON
    • Through Wire with Monitor – TW4M & TW8M
  • Available in 3 and 5 Knuckle
  • One hinge per box, packed with wood and machine screws
  • Hinge is NRP as a standard
  • High quality brass ferrules and plastic tubing protect the wires

Through-wire hinges cycle tested to ensure durability
Ives warranty applies - 12 months from date of shipment
Through-Wire is rated for 50 volts AC/DC at 3.5 amp continuous and 16 amp pulse, maximum pulse 400 mili second. Monitor rated 30VDC at .5 amp

1000 Series Residential Hinges

  • Full mortise hinges in 2 sizes: 3 1/2" and 4"
  • Two corner options: Square corners and 5/8" or 1/4" radius corners
  • Substrates include: Steel

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the Ives CS Series Continuous Hinges Stainless Steel Full Mortise Hinge w/ AL Cover - 700CS to your wish list.