Adams Rite Deadbolt Lock

For hollow metal or wood doors prepared for hardware according to the specifications of the American National Standards Institute, this MS deadbolt provides maximum security and ease of installation. Its standard 1-1/2" backset dimension provides adequate clearance for the deep stop on the door jamb of hollow metal entrances.

360 turn of key or thumbturn throws or retracts the counterbalanced bolt. Key can be removed only when bolt is in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have MS cam. Mortise thubturn can be used too.

• Bolt: 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight ply laminated stainless steel. Center ply has Alumina-Ceramic core to defeat any hacksaw attack, including rod-type "super" hacksaws.
• Case: Steel with corrosion-resistant plating. 1" x 6" x 2-1/4".
• Backset: 1 1/2" only
• Cylinders and thumb turn not included.
• Strike plate not included. 

When using a cylinder on one side and a thumb turn on the other side, you should use the 1 inch.

 Cylinders, strike plate and thumb turn not included.