Hager Anchor Hinge

 For use on heavy-weight doors receiving high-frequency use.

• For beveled edge doors
• Two anchor leaves
• Four ball bearings
• Non-removable pin standard with button tip and plug
• Steel with Steel pin
• Size: 5" x 4.5"

Must be used with one pair of heavy weight full mortise hinges (BB1168 or BB1199 - sold separately)

With an anchor hinge, the pin is inserted from the bottom and the plug at the top. NRP feature will hold the pin in position. This is necessary due to close ceiling tolerances of some construction. Hinge testing conforms to ANSI A156.1. Furnished with screw hole locations that conform to standards approved by ANSI A156.7.

 Click on template box before you order.